A steel can, tin can, tin (especially in British English, Australian English, Canadian English and South African English), or can is a container made of thin metal, for distribution or storage of goods. Some cans are opened by removing the top panel with a can opener or other tool; others have covers removable by hand without a tool. Cans can store a broad variety of contents: food, beverages, oil, chemicals, etc. In a broad sense, any metal container is sometimes called a "tin can", even if it is made, for example, of aluminium.
Steel cans were traditionally made of tinplate; the tin coating stopped the contents from rusting the steel. Tinned steel is still used, especially for fruit juices and pale canned fruit. Modern cans are often made from steel lined with plastic film, instead of tin. Early cans were often soldered with lead solder.
Cans are highly recyclable and around 65% of Steel recycling.
History
The tin canning process was conceived by the Frenchman Philippe de Girard, who had British merchant
Peter Durand patent the idea in 1810.
The canning concept was based on experimental food preservation work in glass containers the year before by the French inventor
Nicholas Appert. Durand did not pursue food canning, but, in 1812, sold his patent to two Englishmen,
Bryan Donkin and John Hall, who refined the process and product, and set up the world's first commercial canning factory on Southwark Park Road, London. By 1813 they were producing their first tin canned goods for the
Royal Navy. By 1820, tin canisters or cans were being used for gunpowder, seeds, and turpentine.
Early tin cans were sealed by soldering with a tin–lead alloy, which could lead to lead poisoning. Automated soldering machines started to arrive in the 1870s and steel started to displace iron as a material for the cans at the very end of the 19th century. Locking side seam was invented by Max Ams in 1888, giving the rise to a "sanitary can" design, where the solder was found only on the outside of the can and never touched the food. The modern three-piece design dates back to 1904 (Sanitary Can Company of New York).
In 1901 in the United States, the American Can Company was founded, at the time producing 90% of the tin cans in the United States.[ American Can Company: Revolution in Containers , Excerpts of William C. Stolk; Address of The Newcomen Society of North America, April 21, 1960 – Printed July 1960, from oilcans.net, retrieved 16 July 2010] It bought out the Sanitary Can Company of New York in 1908, and the three-piece design displaced all other cans by the early 1920s. The can saw very little change since then, although better technology brought 20% reduction in the use of steel, and 50% - in the use of tin (the modern cans are 99.5% steel).
Canned food in tin cans was already quite popular in various countries when technological advancements in the 1920s lowered the cost of the cans even further.
About 600 different types of cans were used in the early 21st century, with the most popular being the three-piece design with side seam and two double-seamed ends, followed by the two-piece construction with sides and bottom drawn as one piece.
Description
Most cans are right circular cylinders with identical and parallel round tops and bottoms with
right cylinder. However, in cans for small volumes or particularly-shaped contents, the top and bottom may be rounded-corner rectangles or ovals. Other contents may suit a can that is somewhat conical in shape.
Fabrication of most cans results in at least one rim—a narrow ring slightly larger than the outside diameter of the rest of the can. The flat surfaces of rimmed cans are recessed from the edge of any rim (toward the middle of the can) by about the width of the rim; the inside diameter of a rim, adjacent to this recessed surface, is slightly smaller than the inside diameter of the rest of the can.
Three-piece can construction results in top and bottom rims. In two-piece construction, one piece is a flat top and the other a Deep drawing cup-shaped piece that combines the (at least roughly) cylindrical wall and the round base. Transition between wall and base is usually gradual. Such cans have a single rim at the top. Some cans have a separate cover that slides onto the top or is hinged.
Two piece steel cans can be made by "drawing" to form the bottom and sides and adding an "end" at the top: these do not have side seams. Cans can be fabricated with separate slip-on, or friction fit covers and with covers attached by hinges. Various easy opening methods are available.[Soroka (2002) Fundamentals of Packaging Technology, Institute of Packaging Professionals ]
In the mid-20th century, a few milk products were packaged in nearly rimless cans, reflecting different construction; in this case, one flat surface had a hole (for filling the nearly complete can) that was sealed after filling with a quickly solidifying drop of molten solder. Concern arose that the milk contained unsafe levels of lead leached from this solder plug.
Advantages of steel cans
A number of factors make steel cans useful containers for beverages. Steel cans are stronger than cartons or plastic, and less fragile than glass, protecting the product in transit and preventing leakage or spillage, while also reducing the need for secondary packaging.
Steel and aluminium packaging offer complete protection against light, water and air, and metal cans without resealable closures are among the most tamper-evident of all packaging materials.
As an ambient packaging medium, steel cans do not require cooling in the supply chain, simplifying logistics and storage, and saving energy and cost.
File:Fransk Linolja - 2021.jpg|A can of French linseed oil
File:Canned-air.jpg|Compressed gas with dispensing valve
File:Trevqrp.png|Flip-top can
Materials and health issues
Tin
No cans currently in wide use are composed primarily or wholly of tin.
Until the second half of the 20th century, almost all cans were made of
tinplate steel. The steel was cheap and structurally strong, but prone to
rust; the tin coating prevented the wet food from
corrosion the steel. Corrosion-resistant coatings on almost all steel food cans are now made from plastic, not tin. Some manufacturers use
Vitreous enamel, instead.
Dissolution of tin into the food
Tin is corrosion resistant, but acidic food like fruits and vegetables can corrode the tin layer. Nausea, vomiting, and diarrhea have been reported after ingesting canned food containing 200 mg/kg of tin.
A 2002 study showed that 99.5% of 1,200 tested cans contained below the UK regulatory limit of 200 mg/kg of tin – an improvement over most previous studies, which was largely attributed to the increased use of fully lacquered cans for acidic foods. They concluded that the results do not raise any long term food safety concerns for consumers. The two non-compliant products were voluntarily recalled.
Evidence of tin impurities can sometimes be indicated by discolored food (pears, for example), but lack of color change does not guarantee that a food is not tainted with tin.
Lead
lead poisoning in any quantity. Infants and children are more severely affected, as lead harms brain development.
In November 1991, US can manufacturers voluntarily eliminated lead seams in food cans. Imported food cans continued to include lead soldered seams.
In 1995, the US FDA issued a rule prohibiting lead soldered food cans, including both domestic and imported food cans.
Plastic linings
Many metal food cans are lined with plastic, to prevent the food from corroding the can.
[
]
-
Update on can lining changes
-
Industry explainer
These linings can leach contaminants into the canned food.
Some of these contaminants are substances with known health harms, though whether they are ingested in canned food in levels sufficient to cause harms is not known.
[
UK Food Standards Agency is unsure of harms to humans.
Review finding canned food consumption is a predictor of urine BPA.
Market survey of the materials in can linings, including BPA-free substitutes.
Review discussing migration of contaminants in canned food from can materials
Update on can lining changes
Washington State, in the US, looking at improving the safety of can linings., and specifically ]
Among other substances, the plastic linings in food cans often contain
/ref> Pregnant women who eat more canned food have higher levels of BPA in their urine.
Other constituents in can linings, including newer BPA-free can linings, have also been identified as having known health harms.[
]
-
Market survey of the materials in can linings, including BPA-free substitutes.
-
Review discussing migration of contaminants in canned food from can materials
-
Update on can lining changes
-
Industry explainer
-
an industry-run market survey showing only some cans imported to the US now contain BPA, as of 2020.
-
Washington State, in the US, looking at improving the safety of can linings., and specifically
Bisphenol-A
Bisphenol-A (BPA) is a controversial chemical compound present in commercially available tin can plastic linings
and transferred to canned food. The inside of the can is coated with an
epoxy coating, in an attempt to prevent food or beverage from coming into contact with the metal. The longer food is in a can, and the warmer and more acidic it is, the more BPA leaches into it. In September 2010, Canada became the first country to declare BPA a toxic substance.
In the
European Union and Canada, BPA use is banned in baby bottles.
The FDA does not regulate BPA (see BPA controversy#Public health regulatory history in the United States). Several companies, like Campbell's Soup, announced plans to eliminate BPA from the linings of their cans,
but have not said which chemical they plan to replace it with. (See BPA controversy#Chemical manufacturers reactions to bans.)
Canada
In 2016, BPA was common in food can linings in Canada.
, Health Canada's Food Directorate concluded that "the current dietary exposure to BPA through
food packaging uses is not expected to pose a health risk to the general population, including newborns and infants". They also stated that, as some animal studies had shown effects from low levels of BPA, they were seeking to make BPA levels in food packaged for infants and newborns (especially formula). They also cited a WHO review.
UK
In modern times, the majority of food cans in the UK
have been lined with a plastic coating containing
bisphenol A (BPA). The coating prevents acids and other substances from corroding the tin or aluminium of the can, but leaching of BPA into the cans contents was investigated as a potential health hazard. The UK Food Standards agency currently considers can-derived BPA levels to be acceptable, but is investigating its safe-level thresholds; it currently has a temporary threshold for BPA, .
US
A 2016 market survey using Fourier-transform infrared spectrums to identify materials, found BPA and other substances known to have health harms were common in food can linings in the US. A similar survey done by food can manufacturers in 2020 found BPA only in some imported cans; it did not discuss potential harms from lining substances other than BPA.
[
]
-
Market survey of the materials in can linings, including BPA-free substitutes.
-
Update on can lining changes
-
Industry explainer
-
an industry-run market survey showing only some cans imported to the US now contain BPA, as of 2020.
-
Washington State, in the US, looking at improving the safety of can linings., and specifically
Labels
A can traditionally has a printed
label glued to the outside of the curved surface, indicating its contents. Some labels contain additional information, such as recipes, on the reverse side. Labels are sometimes printed directly onto the metal before or after the metal sheet is formed into the individual cans.
Traditionally, labels were glued on with casein glue, which dissolved easily in hot water. Some other glues may make the label harder to remove for recycling.
Standard sizes
Cans come in a variety of shapes and sizes. Walls are often stiffened with rib bulges, especially on larger cans, to help the can resist dents that can cause seams to split.
Can sizes in the United States have an assortment of designations and sizes. For example, size 7/8 contains one serving of half a cup with an estimated weight of 4 ; size 1 "picnic" has two or three servings totalling one and a quarter cups with an estimated weight of 10 ounces; size 303 has four servings totalling 2 cups weighing 15 ounces; and size 10 cans, most widely used by food services selling to cafeterias and restaurants, have twenty-five servings totalling 13 cups with an estimated weight of 103 ounces (size of a roughly 3 pound coffee can). These are U.S. customary cups, not British Imperial standard.
In the United States, sometimes reference cans by size. The Can Manufacturers Institute defines these sizes, expressing them in three-digit numbers, as measured in whole and sixteenths of an inch for the container's nominal outside dimensions: a 307 × 512 would thus measure 3 and 7/16" in diameter by 5 and 3/4" (12/16") in height. Older can numbers are often expressed as single digits, their contents being calculated for room-temperature water as approximately eleven ounces (#1 "picnic" can), twenty ounces (#2), thirty-two ounces (#3), fifty-eight ounces (#5), and one-hundred-ten ounces (#10 "coffee" can).
|
|
| Tomato paste |
| Chipotle peppers |
| |
| Mandarin oranges |
| Condensed milk |
| Cranberry Sauce, Pork & Beans |
| |
| |
| Fruits, Vegetables, Soups |
| |
| |
| Juices, Soups, Vegetables |
| |
| |
| |
| Fruits, Vegetables |
| |
| |
| Fruit Juice, Soups |
| Fruits, Vegetables |
In parts of the world using the metric system, tins are made in 250, 500, 750 ml (millilitre) and 1 L (litre) sizes (250 ml is approximately 1 cup or 8 ounces). Cans imported from the US often have odd sizes such as 3.8 L (1 US gallon), 1.9 L (1/2 US gallon), and 946 ml (2 / 1 quart).
In the UK and Australia, cans are usually measured by net weight. A standard size tin can holds roughly 400 g; though the weight can vary between 385 g and 425 g depending on the density of the contents. The smaller half sized can holds roughly 200 g, typically varying between 170 g and 225 g.
Fabrication of cans
Rimmed three-piece can construction involves several stages;
-
Forming a tube and welding or soldering the seam of the sides
-
Joining the bottom end to the tube
-
Printing or attaching labels to the can
-
Filling the can with content; sterilization or retorting is required for many food products
-
Joining the wall and top "end".
Double seam rims are crucial to the joining of the wall to a top or bottom surface. An extremely tight fit between the pieces must be accomplished to prevent leakage; the process of accomplishing this radically deforms the rims of the parts. Part of the tube that forms the wall is bent, almost at its end, turning outward through 90 degrees, and then bent further, toward the middle of the tube, until it is parallel to the rest of the tube, a total bend of 180 degrees.
The outer edge of the flat piece is bent against this toward the middle of the tubular wall, until parallel with the wall, turning inward through 90 degrees. The edge of bent portion is bent further through another 90 degrees, inward now toward the axis of the tube and parallel to the main portion of the flat piece, making a total bend of 180 degrees. It is bent far enough inward that its circular edge is now slightly smaller in diameter than the edge of the tube. Bending it yet further, until it is parallel with the tube's axis, gives it a total bend of 270 degrees. It now envelops the outward rim of the tube.
Looking outward from the axis of the tube, the first surface is the unbent portion of the tube. Slightly further out is a narrow portion of the top, including its edge. The outward-bent portion of the tube, including its edge, is still slightly further out. Furthest out is the 90-degree-bent portion of the flat surface.
The combined interacting forces, as the portion of the flat surface adjacent to the interior of the tube is indented toward the middle of the tube and then outward forward the axis of the tube, and the other bent portions of the flat piece and the tube are all forced toward the axis of the tube, drives these five thicknesses of metal against each other from inside and out, forming a "dry" joint so tight that welding or solder is not needed to strengthen or seal it. Illustrations of this process can be found on pages 20–22 of the FAO Fisheries Technical Paper 285 "Manual on fish canning".
Design and manufacture
Steel for can making
The majority of steel used in packaging is tinplate, which is steel that has been coated with a thin layer of tin, whose functionality is required for the production process.
The tin layer is usually applied by electroplating.
Two-piece steel can design
Most steel beverage cans are two-piece designs, made from 1) a disc re-formed into a cylinder with an integral end, double-seamed after filling and 2) a loose end to close it.
Steel cans are made in many different diameters and volumes, with opening mechanisms that vary from ring pulls and tab openers, to wide open mouths.
Drawn-and-ironed (DWI) steel cans
The process of re-forming sheet metal without changing its thickness is known as 'drawing'. Thinning the walls of a two-piece can by passing it through circular dies is called 'ironing'. Steel beverage cans are therefore generally referred to as drawn-and-ironed, or DWI, cans (sometimes D&I). The DWI process is used for making cans where the height is greater than the diameter, and is particularly suited to making large volumes of cans of the same basic specification.
Steel can wall thicknesses are now 30% thinner and weigh 40% less than 30 years ago, reducing the amounts of raw materials and energy required to make them. They are also up to 40% thinner than aluminium.
Magnetic properties
Carbon steel is
Ferromagnetism. For beverage packaging this is unique. This allows the use of magnetic conveyor systems
to transfer empty cans through the filling and packing processes, increasing accuracy and reducing potential spillage and waste.
In
recycling facilities, steel cans may be readily separated from other waste using magnetic equipment including cross-belt separators, also known as overband magnets, and drum magnets.
Opening cans
The first cans were heavy-weight containers that required considerable force to open, with instructions directing to use a hammer and
chisel; during the war of 1812, British soldiers resorted to
and knives to get them open. After an introduction of much thinner cans in the 1850s, specialized opening tools became a practical possibility, and were introduced in 1855 (Robert Yeates
) and 1858 (Ezra J. Warner). The latter unwieldy design saw limited use by soldiers in the American Civil War. A push-lever opener similar to modern ones was introduced in 1860 ("Bull's Head"), and one with a cutting wheel was invented in 1870 (William W. Lyman). A
serrated wheel, which became common in rotating can openers, was first used by the Star Can Opener Company in 1925.
While or cans of liquid such as broth can be punctured—as with a church key—to pour out the contents, solid or semisolid contents require removing one end of the can. This can be accomplished with a heavy knife or other sharp tool, but can openers are safer, easier, and more convenient.
Some cans, such as those used for , have a specially scored lid so that the user can break out the metal by the leverage of winding it around a slotted twist-key. Until the mid-20th century, some sardine tins had solder-attached lids, and the twist-key worked by forcing the solder joint apart.
The advent of pull tabs in beverage cans spread to the canning of various food products, such as pet food or nuts (and non-food products such as motor oil and ). The ends are known as easy open lids because they open without any tools or implements.
Cans can be made with easy open features. Some cans have for pouring liquids and resealing. Some have hinged covers or slip-on covers for easy access. Paint cans usually have a lid with an interference fit, removable and replaceable any number of times so the paint may be stored between uses.
File:Dosenoeffner.silber2.png|Mechanism of a can opener
File:Euroshopper canned marrowfat peas.jpg|Can that requires a can opener
File:Tomato soup in a can pull open top.jpg|Soup can with a ring-pull tab
File:Can(Easy Open Can).JPG|Opened can with a ring-pull tab
File:Corned-beef-1.jpg|Keyed side opening
File:Sardines in a can.jpg|Easy open sardine can
File:POE Stay-on tab.jpg|Stay-on tab
Recycling and re-use
Steel from cans and other sources is the most
recycled packaging material.
Around 65% of steel cans are recycled.
In the United States, 63% of steel cans are recycled, compared to 52% of aluminium cans.
In Europe, the recycling rate in 2016 is 79.5%.
Most can recycling occurs at the smelters, but individual consumers also directly reuse cans in various ways. For instance people can create functional and decorative items for their home, from organizing tools to making garden decor.
Sustainability and recycling of steel beverage cans
Steel recycling
From an ecological perspective, steel may be regarded as a closed-loop material: post-consumer waste can be collected, recycled and used to make new cans or other products.
Each tonne of scrap steel recycled saves 1.5 tonnes of CO
2, 1.4 tonnes of iron ore and 740 kg of coal. Steel is the world's most recycled material, with more than 85% of all the world's steel products being recycled at the end of their life: an estimated 630 million tonnes of steel scrap were recycled in 2017, saving 945 million tonnes of CO
2.
Steel can recycling
A steel can can be recycled again and again without loss of quality;
however, for the food grade steel it's required to remove
tin from the scrap metal, which is done by way of
electrochemistry: the tin is leached from a high pH solution at low negative voltage.
Recycling a single can saves the equivalent power for one laundry load, 1 hour of TV or 24 hours of lighting (10W LED bulb).
Steel beverage cans are recycled by being melted down in an electric arc furnace or basic oxygen furnace.
Most steel cans also carry some form of recycling identification such as the Metal Recycles Forever mark,
Smaller carbon footprint
All beverage packaging creates CO
2 emissions at every stage in the production process, from raw material extraction, processing and manufacture through to recycling. However, steel cans are an ecological top performer, as cans can always be recycled. The steel industry needs the used cans and will use them in the production of new steel product. By recycling the cans and closing the loop, CO
2 emissions are dramatically reduced. There is also the potential for higher global steel recycling rates as consumers become more aware of the benefits.
See also
General references, further reading
-
Guide to Tinplate
-
Soroka, W, Fundamentals of Packaging Technology, Institute of Packaging Professionals (IoPP), 2002,
-
Yam, K. L., Encyclopedia of Packaging Technology, John Wiley & Sons, 2009,
External links
